Adhesives And Lubricants

Online Catalogue | Accessories | Aircraft Accessories | Adhesives And Lubricants

Multiplex Zacki Adhesive For Use On Elapor Ref: MPX592727
Zacki ELAPOR is a special formulation designed for gluing ELAPOR® foam, and was developed in close collaboration with renowned German manufacturers. Of course, it can also be used with other materials - apart from PTFE or silicone.
Cyanoacrylate “kicker” (activator) can be injurious to health, but this special formulation requires none. The initial bond is achieved about thirty seconds after the parts are joined; full strength in about ten minutes.
Special Features:
Optimised for ELAPOR®
Very long shelf-life
Bottle with self-cleaning, non-clogging applicator tip
Contents 20 g
Price: £2.92 (Including VAT at 15%)

SP Micro Balloons – 40g Ref: T-SP1153
SP Micro Balloons – 40g
Price: £2.92 (Including VAT at 15%)

RC Styro Colours Acrylic Spray Paint Ref: STC Yellow 019

Price: £3.37 (Including VAT at 15%)

Z-Ends 10 Tips & 305mm Tubing Ref: S-ZAPPT18
Extender tips allow smaller drops of glue to be placed in hard-to-reach areas. Ten tips, plus a 12" length of micro-dropper tubing. Very handy.
Price: £2.45 (Including VAT at 15%)

Zap-A-Gap CA+ – 28g/1oz Ref: S-ZAPPT02
Zap-A-Gap CA+ – 28g/1oz
Fills gaps. Allows 7 to 10 seconds for positioning. Cures in 20 seconds. Accelerate with KICKER. Bonds nearly anything, even oily surfaces! Several sizes.
Price: £3.91 (Including VAT at 15%)

Zap CA – 28g/1oz Ref: s-zappt08
Zap CA – 28g/1oz
Super-thin penetrating formula. Works great on most materials, especially balsa. Strengthens fiberglass and cloth. Bonds in 1 to 5 seconds.
Works best on:
• Metal
• Rubber
• Most Plastics
• Aluminum
• Fiberglass
• China
• Wood
• Pottery
• Cloth
Price: £6.15 (Including VAT at 15%)

Slo-Zap CA – 28g/1oz Ref: S-ZAPPT20
Slo-Zap CA – 28g/1oz
Thick and strong for high-stress areas. Ideal for laminating and forming fillets. Allows you 30 seconds to position; cures in 60 sec
Works best on:
• Metal
• Rubber
• Most Plastics
• Aluminum
• Laminate
• Forming Fillets
• Wood
Price: £4.84 (Including VAT at 15%)

Flexi Tips (24pcs) Ref: S-ZAPPT21
Flexi Tips (24pcs)
Make life easier by using these for precision use of CA glues with these.
Price: £1.94 (Including VAT at 15%)

Heat Proof Epoxy – 168g (6oz) Ref: S-SE05
Heat Proof Epoxy – 168g (6oz)
Price: £8.31 (Including VAT at 15%)

UHU Por 50 ml – Polyfoam Glue Ref: S-UHU40662
Fast drying contact
adhesive, designed
for bonding expanded
polystyrene components.
Price: £1.94 (Including VAT at 15%)

REVELL PRO/FIX LIQUID CEMENT 30ml Ref: 5525167
Polystyrene cement with precise applicator tip. 30ml.
Ideal for plastic model kits.
Price: £2.92 (Including VAT at 15%)

BALSA CEMENT GIANT 75ml Ref: 5527930
BALSA CEMENT GIANT 75ml
Price: £4.16 (Including VAT at 15%)

Pacer Zap After Run Oil Ref: S-ZAPPT31
Cleans engines and inhibits corrosion from forming. Lasts for months. Ideal for coating metal pushrods before inserting them into sleeves. 1-oz bottle.
Works best on:• Metal
• Engines
Price: £2.92 (Including VAT at 15%)

Zap 8oz (226.8g) 30-Minute Z-POXY Ref: S-ZAPPT39
Zap 8oz (226.8g) 30-Minute Z-POXY
Price: £12.71 (Including VAT at 15%)

Zap 8oz (226.8g) 5-Minute Z-POXY Ref: S-ZAPPT38
Zap 8oz (226.8g) 5-Minute Z-POXY
Price: £13.69 (Including VAT at 15%)

Zap 1.0oz (28.4g) Fiber-Poxy Ref: S-ZAPPT45
Perfect for polyester and epoxy fiberglasss models and repairs, ceramic, plastics, metals, etc. Excellent ARF glue. 1-oz dual syringe package.
Works best on:
• Metal
• Rubber
• Plastics
• Fiberglass
• Aluminum
• Ceramic
Price: £3.43 (Including VAT at 15%)

Grip Lightweight Filler 250ml Ref: S-RA600
Grip Filler is extremely lightweight and sands very easily at the same rate as balsa wood, so there are no tell tale mounds when you have finished your repair.
Price: £5.13 (Including VAT at 15%)

Clear Casting Resin 250g Ref: S-BG20
Clear Casting Resin 250g
Price: £11.01 (Including VAT at 15%)

Zap 0.2oz (5.7g) Z-42 Threadlocker Ref: S-ZAPPT42
Zap 0.2oz (5.7g) Z-42 Threadlocker
Price: £2.20 (Including VAT at 15%)

Zap Hinge Glue Ref: S-ZAPPT55
Bonds virtually any hinge material, except CA hinges. Easy to use.
Price: £2.69 (Including VAT at 15%)

S-ZAPPT56 ZAP Canopy Glue 59ml Ref: S-ZAPPT56
Zap canopy glue is a neat and tidy way of fixing the canopy to your model.
Price: £3.17 (Including VAT at 15%)

ZAP 0.7 Oz (20 grm) Odourless Ref: S-ZAPPT25
ZAP 0.7 Oz (20 grm) Odourless
Price: £6.36 (Including VAT at 15%)

Grip Cyanoacrylate Medium 25g Ref: S-RA10
Grip Cyanoacrylate, or 'Super Glue' is a high performance instant setting adhesive that forms lightweight, strong joints with a huge number of materials.

Price: £2.92 (Including VAT at 15%)

Grip Cyanoacrylate Thin 25g Ref: S-RA11
Grip Cyanoacrylate, or 'Super Glue' is a high performance instant setting adhesive that forms lightweight, strong joints with a huge number of materials.

Price: £2.92 (Including VAT at 15%)

Grip Cyanoacrylate Thick 25g Ref: S-RA12
Grip Cyanoacrylate, or 'Super Glue' is a high performance instant setting adhesive that forms lightweight, strong joints with a huge number of materials.

Price: £2.92 (Including VAT at 15%)

S-RA19 Grip Skin Debonder 20ml Ref: S-RA19
A must for every model makers box, Grip super glue skin debonder 20ml.
Price: £2.92 (Including VAT at 15%)

Zap Foam Safe Kicker 2oz (56.7g) Ref: S-ZAPPT28
Zap Foam Safe Kicker 2oz (56.7g)
Price: £4.39 (Including VAT at 15%)

Zap-A-Dap-A-Goo II Ref: S-ZAPPT12
Strong flexible adhesive/sealer. Bonds anything. Bonds can be cut with a razor knife. Great for all fix-it, mend-it, and stick-it jobs. 3-oz tube.
Works best on:
• Metal
• Rubber
• Most Plastics
• Aluminum
• Ceramic
• China
• Wood
• Pottery
• Cloth
Price: £3.19 (Including VAT at 15%)

Stabilit 20 Minute Adhesive Ref: Stabilit
Stabilit 20 minute adhesive.
Price: £10.75 (Including VAT at 15%)

JP SANDING SEALER 60ml No.2 Ref: 5527860
SANDING SEALER 60mlNo.2
Price: £2.68 (Including VAT at 15%)

BALSALOC 110ml Ref: 5523187
Use this excellent preparation to improve the adhesion of most iron-on covering films to difficult surfaces e.g. ply or to attach Litespan or Fibafilm. Safe to use on plastic foam.
Price: £3.76 (Including VAT at 15%)

JP SATIN FUEL PROOFER 60ml Ref: 5527880
SATIN FUEL PROOFER 60ml
Price: £2.99 (Including VAT at 15%)

CLEAR DOPE 60ml Ref: 5527848
CLEAR DOPE 60ml
Price: £2.44 (Including VAT at 15%)

PRYMOL 110ml Etch Primer Ref: 5523188
Colourless liquid for use on Solarfilm, Solarspan, metals and some other plastics as an etch primer. After drying it improves the adhesion of many iron-ons, adhesives and paints to the treated surface. Applied to Solarfilm before applying an overlapping piece of Solarfilm, the overlap seam will be stronger, it will resist the entry of fuel and its edges will not lift even after long use. Apply Prymol with a small pad of cloth or tissue. Use enough to moisten the surface, then allow to dry for a few minutes. When spraying paint, mask off as normal, spray a thin coat of Prymol, allow to dry and spray the paint as normal.
Price: £4.11 (Including VAT at 15%)

Tufkote F.Proof Gloss.100ml Ref: S-TK1
Tufkote F.Proof Gloss.100ml.
Requires Catalyst
Price: £4.15 (Including VAT at 15%)

People who bought this item also bought:

1. Tufkote Catalyst For Gloss & Matt (Ref: S-TK1/1)

Tufkote F.Proof Matt.100ml Ref: S-TK5
Tufkote F.Proof Matt.100ml
Requires Catalyst
Price: £4.15 (Including VAT at 15%)

People who bought this item also bought:

1. Tufkote Catalyst For Gloss & Matt (Ref: S-TK1/1)

Tufkote Catalyst For Gloss & Matt Ref: S-TK1/1
Tufkote Catalyst For Gloss & Matt
Price: £1.71 (Including VAT at 15%)

New Products

Futaba 12ch Combo 2.4GHz M1 R6014FS £899.99 Taking 12 Channel Control to the Next Level! Brand New 2.4GHz Version Now Available When you improve upon all of the best that Futaba 2048 technology has to offer, you have the 12FG -one serious system for discerning R/C pilots. From the state-of-the-art receiver to the capacity to store memories for a whopping 1,882 models, the 12FG has the features and functions to position itself far above the competition. And because it's from Futaba, you can fly with confidence, knowing that the industry's finest research and development is behind you. 12FG Specification: G3 2048 resolution 30 model memory -up to 1,882 models with a 1GB SD card Combines airplane, glider, and helicopter programming Supports 13 wing types, 3 tail types, and 8 heli swash types 8 total flight conditions (7 plus the default) Variable Dual Rates (VDR) Servo grouping for servo synchronization Digital trims on all 4 main channels 7.2V 1700mAh NiMH transmitter battery Battery charging jack Ergonomic rubber grips Newly designed "joystick" button and Dial-N-Key editing for easier menu navigating find out more	Futaba 12ch Combo 2.4GHz M2 R6014FS £899.99 Taking 12 Channel Control to the Next Level! Brand New 2.4GHz Version Now Available When you improve upon all of the best that Futaba 2048 technology has to offer, you have the 12FG -one serious system for discerning R/C pilots. From the state-of-the-art receiver to the capacity to store memories for a whopping 1,882 models, the 12FG has the features and functions to position itself far above the competition. And because it's from Futaba, you can fly with confidence, knowing that the industry's finest research and development is behind you. 12FG Specification: G3 2048 resolution 30 model memory -up to 1,882 models with a 1GB SD card Combines airplane, glider, and helicopter programming Supports 13 wing types, 3 tail types, and 8 heli swash types 8 total flight conditions (7 plus the default) Variable Dual Rates (VDR) Servo grouping for servo synchronization Digital trims on all 4 main channels 7.2V 1700mAh NiMH transmitter battery Battery charging jack Ergonomic rubber grips Newly designed "joystick" button and Dial-N-Key editing for easier menu navigating find out more	Futaba 14ch Rx 2.4GHz £161.99 Compact, lightweight 14-channel receiver whose small size makes it equally suitable for both small models and large model aircraft giving it great flexibility.Compatible with TM-8 und TM-14 2.4 GHz FASST RF modules. find out more

Futaba 6ch Rx 2.4GHz Parkfly (Molex conn) £53.99 1.6 x 1.1 x .35 in (40 x 27 x 9 mm) 0.33 oz (9.32 g) 0.22 oz (6.37 g) find out more	DS318 0.7Kg/0.08S MICRO DIGITAL SERVO £17.57 Torque: 0.7Kg Speed: 0.08 S/600 Weight: 6g Size: 19.8 x 11.2 x 20.9mm find out more	DS3500G 2.0Kg/0.07S MINI DIGI TAIL SERV0 £66.55 Torque: 2.0Kg Speed: 0.07 S/600 Weight: 26g Size: 26.5 x 15 x 33mm find out more

Servo Sub-Micro (Molex) 0.09s/1.7Kg £16.19 Specification: Torque: 20.8 oz-in (1.5 kg-cm) / 23.5 oz-in (1.7 kg-cm) Speed: .10 sec/60° / .09 sec/60° Dimensions: .86 x .43 x .78in (21.8 x 11 x 19.8mm) Weight: .27oz (7.8g) find out more	GP750 Head Lock Gyro £105.00 Operating Voltage:DC 4.5~7V Current Consumption:<80mA @ 4.8V Angular Detection Speed:500 degrees/sec Operating Humidity:0?~65? RoHS certification. Operating Humidity:0%~95% Size:26x25x11mm Weight:14g find out more	GP750 Head Lock Gyro Combo (GP750+DS420) £114.99 GP750 Ratings: Operating Voltage:DC 4.5~7V Current Consumption:<80mA @ 4.8V Angular Detection Speed:500 degrees/sec Operating Humidity:0?~65? RoHS certification. Operating Humidity:0%~95% Size:26x25x11mm Weight:14g DS420 Ratings: Stall torque:0.75kg.cm(4.8V) 1.0kg.cm(6.0V) Motion speed:0.08sec/60°(4.8V) 0.06sec/60°(6.0V) Rating voltage:DC 4.8-6V Temperature range:-20°C~+60°C Dimension:22.8 x 12 x 25.4mm Weight:12.7g find out more

GP750 Head Lock Gyro Combo \n (GP750+DS620) $GP750 Head Lock Gyro Combo \n (GP750+DS620)$ £139.99 GP750 Ratings: Operating Voltage:DC 4.5~7V Current Consumption:<80mA @ 4.8V Angular Detection Speed:500 degrees/sec Operating Humidity:0?~65? RoHS certification. Operating Humidity:0%~95% Size:26x25x11mm Weight:14g DS620 Ratings: Stall torque:8.0kg.cm(4.8V) 10.0kg.cm(6.0V) Motion speed:0.09sec/60°(4.8V) 0.07sec/60°(6.0V) Rating voltage:DC 4.8-6V Temperature range:-20°C~+60°C Dimension:40.3x20.1x36mm Weight:52.2g find out more	GP750 Head Lock Gyro Combo \n(GP750+DS520) $GP750 Head Lock Gyro Combo \n(GP750+DS520)$ £128.00 GP750 Ratings: Operating Voltage:DC 4.5~7V Current Consumption:<80mA @ 4.8V Angular Detection Speed:500 degrees/sec Operating Humidity:0?~65? RoHS certification. Operating Humidity:0%~95% Size:26x25x11mm Weight:14g DS520 Ratings: Stall torque:1.9kg.cm(4.8V) 2.5kg.cm(6.0V) Motion speed:0.09sec/60°(4.8V) 0.07sec/60°(6.0V) Rating voltage:DC 4.8-6V Temperature range:-20°C~+60°C Dimension:35 x 15 x 29.2mm Weight:25.9g find out more	JP L-39 DUCTED FAN ARTF (INC B/LESS MOTOR) £105.74 Motor - 3600rpm/V (installed) Wingspan - 900mm (35.4ins) Weight - approx. 1100-1200g Suits - 3 channel Battery - Suits 11.1V - 14.8V 2100-3200 Li-Poly Length - 810mm (31.9ins) Recommended Servo - 3 micro servos Recommended ESC - 35 amp BEC find out more