Brushless Motors

Online Catalogue | Accessories | Aircraft Accessories | Brushless Motors

XTRA2815/24 Brushless Motor Ref: M-XTRA-2815-24
A range of high performance brushless outrunner motors that offer low weight, high power and exceptional value for money.
Specification
Operating: 3-6A
Turns: 24
Dimensions: 28.8x15mm
NiCad/Ni-MH: 6-8 cells
LiPo: 2-3 cells
RPM per Volt: 1100
Weight: 33g
Current at Max Effic: 7A/60s
Shaft dia: 3.17mm
Price: £24.45 (Including VAT at 15%)

XTRA2826/09 Brushless Motor Ref: M-XTRA-2826-09
A range of high performance brushless outrunner motors that offer low weight, high power and exceptional value for money.
Specification
Dimensions: 28.8x26mm
NiCad/Ni-MH: 4-8 cells
LiPo: 2-3 cells
Operating: 8-12A
Turns: 9
RPM per Volt: 1820
Weight: 48g
Current at Max Effic: 15A/60s
Shaft dia: 3.17mm
Price: £24.45 (Including VAT at 15%)

GWS 2208/18T B/MOTOR PLUS 25A ESC (GWCBS017D) Ref: 4448380
GWS 2208/18T Brushless Out-Runner Motor
Complete with - Motor Mount, Prop-Saver, Screw set
Voltage - 11.1v (3 Cell Li-Poly)
Weight - 36g
Price: £33.27 (Including VAT at 15%)

E-Flite Power 10 Outrunner Motor 1100KV Ref: EFLM4010A
At flying sites where noise from models may be an issue, E-flite has the perfect answer with this high performance outrunner motor. It is an especially good match for the E-flite Brio10 for high speed F3A precision or artistic aerobatics. Featuring high quality construction with a ball bearing supported hardened steel shaft and slotted 12-pole design, it makes an ideal choice for pilots who are thinking about electric flight but may be worried about a lack of performance. The Power 10BL motor is a smooth running, quiet, high performance alternative to .10size glow engines, and powerful enough to power models weighing 32-48 ounce (910 to 1360gm) airplanes, and its ideal for 3D models 28-36 ounce (790 to 1020gm) or any other small electric model requiring up to 375 watts of power. This outrunner is constructed from top quality materials, with a hardened steel shaft, the only wearing parts in the system are the bearings, and these have been rated for hundreds of hours of usage. Silicone covered wire with gold connectors ensures that there is maximum current flow to maximise performance. The external radial rotor design of this motor means the 5mm shaft can be easily reversed for alternative motor installations, and a complete set of mounting hardware and aluminium motor mount is included.
Specification:
Diameter: 1.4 inch (35mm)
Case length: 1.6 inch (42mm)
Weight: 4.3 oz (122g)
KV: 1100Kv
Shaft diameter: .2 inch (5mm)
Continuous current: 30Amp
Maximum burst current: 38Amp 15 seconds
Controller: 35-40 Amp brushless required
Prop: 10x5-12x6
Cells: 2 –3S Li-Po or 6-10 cell Ni-Mh/Ni-Cad
Price: £47.91 (Including VAT at 15%)

E-Flite Power 15 Outrunner Motor 950KV Ref: EFLM4015A
At flying sites where noise from models may be an issue, E-flite has the perfect answer with this high performance outrunner motor. Featuring high quality construction with a ball bearing supported hardened steel shaft and slotted 12-pole design, it makes an ideal choice for pilots who are thinking about electric flight but may be worried about a lack of performance. The Power 15BL motor is a smooth running, quiet, high performance alternative to .15size glow engines, and powerful enough to power models weighing 32-56 ounce (1020 to 1590gm) airplanes, and its ideal for 3D models of 32 to 40 ounce (910 to 1135gm) or any other small electric model requiring up to 425 watts of power. This outrunner is constructed from top quality materials, with a hardened steel shaft, the only wearing parts in the system are the bearings, and these have been rated for hundreds of hours of usage. Silicone covered wire with gold connectors ensures that there is maximum current flow to maximise performance. The external radial rotor design of this motor means the 5mm shaft can be easily reversed for alternative motor installations, and a complete set of mounting hardware and aluminium motor mount is included.
Specification:
Diameter: 1.4 inch (35mm)
Case length: 1.9 inch (50mm)
Weight: 5.4 oz (152g)
KV: 950Kv
Shaft diameter: .2 inch (5mm)
Continuous current: 34Amp
Maximum burst current: 42Amp 15 seconds
Controller: 40 to 45 Amp brushless required
Prop: 10x6-13x6.5
Cells: 3-4S Li-Po or 8-12 cell Ni-Mh/Ni-Cad
Price: £49.91 (Including VAT at 15%)

E-Flite Power 25 BL Outrunner Motor, 840 Kv Ref: EFLM4025A
At flying sites where noise from models may be an issue, E-flite has the perfect answer with this high performance outrunner motor. Featuring high quality construction with a ball bearing supported hardened steel shaft and slotted 12-pole design, it makes an ideal choice for pilots who are thinking about electric flight but may be worried about a lack of performance. The Power 25 motor is a smooth, quiet, high performance alternative to .25size glow engines, and powerful enough to power models weighing 3 to 5.5lb (1.4-2.5kg) or .15 glow engine size 3D airplanes up 3.5lb (1.6kg) requiring up to 550 watts of power, and it’s an especially a good match for scale models weighing between 4lb (1.8kg) and 5lb (2.2kg) This outrunner is constructed from top quality materials, with a hardened steel shaft, the only wearing parts in the system are the bearings, and these have been rated for hundreds of hours of usage. Silicone covered wire with gold connectors ensures that there is maximum current flow to maximise performance. The external radial rotor design of this motor with front shaft makes for easy mounting, with the ability to change shaft direction easily as a complete set of mounting hardware and aluminium motor mount is included.
Specification:
Diameter: 1.4 inch (35mm)
Case length: 2.1 inch (54mm)
Weight: 6.7oz (190g)
KV: 840Kv
Shaft diameter: .20 inch (5mm)
Continuous current: 32Amp
Maximum burst current: 44Amp
Controller: 40Amp Brushless required
Prop: 11x8-14x7
Cells: 3S –4S Li-Po
Price: £58.91 (Including VAT at 15%)

E-Flite Power 32 Outrunner Motor, 770Kv Ref: EFLM4032A
An ideal replacement for 30-32 glow engine size sport and scale airplanes weighing 3.5-6lb (1.6-2.7kg) 25 size 3D airplanes up to 4lb (1.8 kg) or models requiring up to 650 watts of power. Quiet, powerful and equivalent to a Speed 600 motor. The Power 32 outrunner is constructed from top quality materials, with a hardened steel shaft supported by twin ball bearings. The only wearing parts in the system are these bearings, and these have been rated for hundreds of hours of usage. Silicone covered wire with gold connectors ensure that there is maximum current flow to optimise performance. There is no need to use a gearbox with the Power 32 as the performance of this motor allows quite large propellers to be turned with ease, 12x7 to 14x10 being the norm.
Specification:
Diameter: 1.7 inch (42mm)
Case length: 1.9 inch (50mm)
Weight: 7 oz (200g)
KV: 770Kv
Shaft diameter: .2 inch (5mm)
Continuous current: 42Amp
Maximum burst current: 60Amp
Controller: 60amp brushless required
Prop: 11 x 7 to 14 x 10
Cells: 10 – 14 Ni-Mh/Ni-cd or 3-4 Li-Po
Price: £65.92 (Including VAT at 15%)

E-Flite Power 46 BL Outrunner Motor, 670KV Ref: EFLM4046A
The Power 46BL is designed to deliver clean, quiet, high performance power for .40-46 glow engine size sport and scale airplanes weighing four to seven pounds (1.8-3.2 Kg) 25-40 size 3D airplanes up to five pounds (2.2kg) or models requiring up to 800 watts of power. This outrunner is constructed from top quality materials, with a hardened steel shaft, the only wearing parts in the system are the bearings, and these have been rated for hundreds of hours of usage. Silicone covered wire with gold connectors minimise resistance ensuring that there is maximum current flow to optimise performance, making this motor a perfect match for Hangar 9’s 40 size trainers Alpha 40 HAN2450, Arrow 40 HAN2625 and warbirds like the T34 Mentor HAN 2425 and a great match for sport planes like the Ultra- Stick40 HAN1675 or HAN1690 and smaller sport planes like the Twist 40 HAN 2650. The motor may be fitted behind the firewall, or with the addition of the aluminium radial mount (supplied) it can be mounted in front of the firewall; this is very useful in glow engine to electric motor conversions. Due to the ease of mounting, the motor may also be used in many other models of similar weight or size.
Specification:
Diameter: 2 inch (50mm)
Case length: 2.15 inch (55mm)
Weight: 10oz (290g)
KV: 670 rpm per volt
Shaft diameter: .24inch (6mm)
Continuous current: 40Amp
Maximum burst current: 55Amp 30 seconds
Controller: 60Amp brushless required
Prop: 12x8 to14x10
Cells: 12–16 Ni-Mh/Ni-cd or 4-5 Li-Po
Price: £89.84 (Including VAT at 15%)

E-Flite Power 60 BL Outrunner Motor 400KV Ref: EFLM4060A
If you are considering electric power for your larger scale model, this motor is a high performance direct drive alternative to 46-60 size glow engines.
The Power 60 is designed to deliver clean, quiet high performance power for 60 size sport and scale model airplanes weighing six to ten pounds (2.7-4.5 kg) 46 size 3D airplanes up to seven pounds (2.2kg) or models requiring up to 1200 watts of power. This outrunner is constructed from top quality materials, with a hardened steel shaft, the only wearing parts in the system are the bearings, and these have been rated for hundreds of hours of usage. Silicone covered wire with gold connectors ensures that there is maximum current flow to maximise performance making this motor a perfect choice for glow engine to electric conversions. Featuring a slotted twelve-pole outrunner design with silicone covered wire and gold bullet connectors rated for current up to sixty amps. The Power 60 motor (when using 6S Li-Po pack) can handle up 1188 watts of input power, easily capable of powering Hangar 9 60 size warbirds like the Corsair 60 HAN2575, P47 Thunderbolt HAN2975, P40 Warhawk HAN2850, P51 Miss America 60 HAN2775 and 46 size 3D planes such as the Hangar 9 Funtana 40 HAN1975, or models requiring 1200 watts.
Specification:
Diameter: 2 inch (50mm)
Case length: 2.4 inch (62mm)
Weight: 13 oz (380g)
KV: 400 rpm per volt
Shaft diameter: .24 inch (6mm)
Continuous current: 40Amp
Maximum burst current: 60Amp 30 seconds
Controller: 80Amp brushless required
Prop: 14x8-16x10
Cells: 16–24 Ni-Mh/Ni-cd or 5-7 Li-Po
Price: £94.83 (Including VAT at 15%)

BL400 DUCTED FAN OUTRUNNER MOTOR 3500KV Ref: EFLM1320DF
This motor is an ideal choice for the E-flite Super Airliner and small Ducted Fan models. This motor will provide great performance on a 66mm diameter fan units with three bladed impellors.
The 400-ducted fan outrunner is constructed from top quality materials, with a 2.3mm hardened steel shaft supported by twin ball bearings. The only wearing parts in the system are these bearings, and these have been rated for hundreds of hours of usage. Extra long silicone covered wire to accommodate most installations and maximum current flow to optimise performance.
Specification:
Diameter: 1 inch (25mm)
Case length: 1.2 inch (31mm)
Weight: 2.0 oz (56g)
KV: 3500 rpm per volt
Shaft diameter: .09 inch (2.3mm)
Continuous current: 19Amp
Maximum burst current: 23Amp (15 seconds)
Controller: 20Amp required
Prop: 3 blade 66mm Ducted Fan Impeller
Cells: 6 to 10 NiMh/NiCd or 3 cell Li-Po
Price: £38.94 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 2204/54 Ref: AXI2204-54
AXI GOLD LINE BRUSHLESS MOTOR 2204/54
Price: £41.39 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 2208/26 Ref: AXI2208-26
AXI GOLD LINE BRUSHLESS MOTOR 2208/26
Price: £40.50 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 2208/34 Ref: AXI2208-34
AXI GOLD LINE BRUSHLESS MOTOR 2208/34
Price: £40.50 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR2 2208/34EVP Ref: AXI2208-34EVP
AXI GOLD LINE BRUSHLESS MOTOR2 2208/34EVP
Price: £46.68 (Including VAT at 15%)

Mod.Motors Rad.Mount Set 2808 Ref: M-MMRMS2808
These AXI radial mounts enable the motor to be fitted onto the front of a firewall, simplifying the electric conversion of IC. models.
Supplied complete with propeller driver.
Price: £8.80 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 2212/26 Ref: AXI2212-26
AXI GOLD LINE BRUSHLESS MOTOR 2212/26
Price: £42.72 (Including VAT at 15%)

Model Motors Radial Mount Set 22xx Ref: M-MMRMS22
These AXI radial mounts enable the motor to be fitted onto the front of a firewall, simplifying the electric conversion of IC. models.
Supplied complete with propeller driver.
Price: £11.26 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 2212/34 Ref: AXI2212-34
AXI GOLD LINE BRUSHLESS MOTOR 2212/34
Price: £42.72 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 2217/09D Ref: AXI2217-09D
AXI GOLD LINE BRUSHLESS MOTOR 2217/09D
Price: £48.44 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 2217/12 Ref: AXI2217-12
AXI GOLD LINE BRUSHLESS MOTOR 2217/12
Price: £48.44 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 2217/16 Ref: AXI2217-16
AXI GOLD LINE BRUSHLESS MOTOR 2217/16
Price: £48.44 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 2808/24 Ref: AXI2808-24
AXI GOLD LINE BRUSHLESS MOTOR 2808/25
Price: £47.13 (Including VAT at 15%)

KMS Quantum 2814/06 outrunner Ref: M-KMSQ2814/06
Max. Continuous Current (Amps): 24
NiCad/Ni-MH: 7-10 cells
LiPo: 2-4 cells
I0: 2A
Turns: 6T
KV RPM: 1290
Diameter: 35mm
Max Current: 32A/60s
Propeller Range: 9.5 x 5, 9 x 6, 10 x 4.7, 10 x 5, 10 x 6
Resistance: 45 mohm
Bearings:
pole: 14
ESC Timing Degrees: 20-30 (high)
Weight: 103g
Length: 36mm
Max Efficiency: 80%
Shaft dia: 4.00mm
Price: £29.35 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 2814/12 Ref: AXI2814-12
AXI GOLD LINE BRUSHLESS MOTOR 2814/13
Price: £51.53 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 2820/08 Ref: AXI2820-08
AXI GOLD LINE BRUSHLESS MOTOR 2820/08
Price: £55.94 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 2820/10 Ref: AXI2820-10
AXI GOLD LINE BRUSHLESS MOTOR 2820/10
Price: £55.94 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 2820/12 Ref: AXI2820-12
AXI GOLD LINE BRUSHLESS MOTOR 2820/12
Price: £55.94 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 2826/08 Ref: AXI2826-08
AXI GOLD LINE BRUSHLESS MOTOR 2826/08
Price: £61.65 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 2826/10 Ref: AXI2826-10
AXI GOLD LINE BRUSHLESS MOTOR 2826/10
Price: £61.65 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 2826/12 Ref: AXI2826-12
AXI GOLD LINE BRUSHLESS MOTOR 2826/12
Price: £61.65 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 4120/14 Ref: AXI4120-14
AXI GOLD LINE BRUSHLESS MOTOR 4120/15
Price: £83.67 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 4130/16 Ref: AXI4130-16
AXI GOLD LINE BRUSHLESS MOTOR 4130/17
Price: £88.08 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 5330/18 Ref: AXI5330-18
AXI GOLD LINE BRUSHLESS MOTOR 5330/18
Price: £146.21 (Including VAT at 15%)

AXI GOLD LINE BRUSHLESS MOTOR 5330/24 Ref: AXI5330-24
AXI GOLD LINE BRUSHLESS MOTOR 5330/24
Price: £146.21 (Including VAT at 15%)

Multiplex Culairs Power Set Ref: 332633
The perfect power set for the Cularis glider from Multiplex.
Includes:
• 1 Himax C 3522-0700 (333025)
• 1 MULTIcont BL-37 Brushless Electronic Speed Control (72276)
• 1 Prop Driver/Spinner (733183)
• 1 12“ x 6“ Folding Prop (733173)

Price: £97.87 (Including VAT at 15%)

JP A36-30 1000 Inrunner Ref: 4445100
J Perkins inrunner brushless motor.
Specification as follows:
1000 RPM/V
Recommended fitment - Ideal Replacement for a Brushed 600-700 Motor
Battery - 6-12cell NiMH 2-3 cell Li-Poly
Weight - 228gd Prop adaptors - included
Connectors and Prop adaptors - included
Working current - 5-30A : Peak 35A
Suggested Prop size - 8x4 - 11x7 direct 5.0mm)
Motor Size - 36x54mm. (Shaft diameter - 5.0mm)
Speed Controller requirement - 35A
Price: £48.44 (Including VAT at 15%)

C35-08 1030 RPM/V O/RUNNER ENERG B/LESS MOTOR Ref: 4445605
C35-08 1150 RPM/V
Weight - 80g
Connectors, Prop adaptors & Mount - included
Price: £31.98 (Including VAT at 15%)

People who bought this item also bought:

1. APC SLOW FLYER PROP 10x4.7 (Ref: LP10047SF)

2. GWS FORMOSA-2 ARTF (NO MOTOR) (Ref: 4460210)

JP A36-30 1500 Inrunner Ref: 4445095
J Perkins brushless inrunner motor.
Specification as follows:
1500 RPM/V
Battery - 6-8 cell NiMH 2-3 cell Li-Poly
Weight - 228g
Connectors and Prop adaptors - included
Working current - 5-35A : Peak 40A
Suggested Prop size - 7x4 - 10x5 direct
Motor Size - 35.5x44mm. (Shaft diameter - 5.0mm)
Speed Controller requirement - 50A
Glow Engine equivalent - .25-.32
Price: £48.44 (Including VAT at 15%)

JP A36-30 780 Inrunner Ref: 4445105
J Perkins range of brushless motors are fantastic value and offer a wide range of specifcations, so what ever your application there is sure to be a motor that suits your needs.
Specification as follows:
780 RPM/V
Battery - 6-20cell NiMH 2-3 cell Li-Poly
Weight - 228g
Connectors - Gold included
Prop adaptors - Included
Working current - 5-25A : Peak 30A
Shaft diameter - 5.0mm
Motor Size - 36x54mm
Speed Controller requirement - 30A

Price: £48.44 (Including VAT at 15%)

New Products

Futaba 12ch Combo 2.4GHz M1 R6014FS £899.99 Taking 12 Channel Control to the Next Level! Brand New 2.4GHz Version Now Available When you improve upon all of the best that Futaba 2048 technology has to offer, you have the 12FG -one serious system for discerning R/C pilots. From the state-of-the-art receiver to the capacity to store memories for a whopping 1,882 models, the 12FG has the features and functions to position itself far above the competition. And because it's from Futaba, you can fly with confidence, knowing that the industry's finest research and development is behind you. 12FG Specification: G3 2048 resolution 30 model memory -up to 1,882 models with a 1GB SD card Combines airplane, glider, and helicopter programming Supports 13 wing types, 3 tail types, and 8 heli swash types 8 total flight conditions (7 plus the default) Variable Dual Rates (VDR) Servo grouping for servo synchronization Digital trims on all 4 main channels 7.2V 1700mAh NiMH transmitter battery Battery charging jack Ergonomic rubber grips Newly designed "joystick" button and Dial-N-Key editing for easier menu navigating find out more	Futaba 12ch Combo 2.4GHz M2 R6014FS £899.99 Taking 12 Channel Control to the Next Level! Brand New 2.4GHz Version Now Available When you improve upon all of the best that Futaba 2048 technology has to offer, you have the 12FG -one serious system for discerning R/C pilots. From the state-of-the-art receiver to the capacity to store memories for a whopping 1,882 models, the 12FG has the features and functions to position itself far above the competition. And because it's from Futaba, you can fly with confidence, knowing that the industry's finest research and development is behind you. 12FG Specification: G3 2048 resolution 30 model memory -up to 1,882 models with a 1GB SD card Combines airplane, glider, and helicopter programming Supports 13 wing types, 3 tail types, and 8 heli swash types 8 total flight conditions (7 plus the default) Variable Dual Rates (VDR) Servo grouping for servo synchronization Digital trims on all 4 main channels 7.2V 1700mAh NiMH transmitter battery Battery charging jack Ergonomic rubber grips Newly designed "joystick" button and Dial-N-Key editing for easier menu navigating find out more	Futaba 14ch Rx 2.4GHz £161.99 Compact, lightweight 14-channel receiver whose small size makes it equally suitable for both small models and large model aircraft giving it great flexibility.Compatible with TM-8 und TM-14 2.4 GHz FASST RF modules. find out more

Futaba 6ch Rx 2.4GHz Parkfly (Molex conn) £53.99 1.6 x 1.1 x .35 in (40 x 27 x 9 mm) 0.33 oz (9.32 g) 0.22 oz (6.37 g) find out more	DS318 0.7Kg/0.08S MICRO DIGITAL SERVO £17.57 Torque: 0.7Kg Speed: 0.08 S/600 Weight: 6g Size: 19.8 x 11.2 x 20.9mm find out more	DS3500G 2.0Kg/0.07S MINI DIGI TAIL SERV0 £66.55 Torque: 2.0Kg Speed: 0.07 S/600 Weight: 26g Size: 26.5 x 15 x 33mm find out more

Servo Sub-Micro (Molex) 0.09s/1.7Kg £16.19 Specification: Torque: 20.8 oz-in (1.5 kg-cm) / 23.5 oz-in (1.7 kg-cm) Speed: .10 sec/60° / .09 sec/60° Dimensions: .86 x .43 x .78in (21.8 x 11 x 19.8mm) Weight: .27oz (7.8g) find out more	GP750 Head Lock Gyro £105.00 Operating Voltage:DC 4.5~7V Current Consumption:<80mA @ 4.8V Angular Detection Speed:500 degrees/sec Operating Humidity:0?~65? RoHS certification. Operating Humidity:0%~95% Size:26x25x11mm Weight:14g find out more	GP750 Head Lock Gyro Combo (GP750+DS420) £114.99 GP750 Ratings: Operating Voltage:DC 4.5~7V Current Consumption:<80mA @ 4.8V Angular Detection Speed:500 degrees/sec Operating Humidity:0?~65? RoHS certification. Operating Humidity:0%~95% Size:26x25x11mm Weight:14g DS420 Ratings: Stall torque:0.75kg.cm(4.8V) 1.0kg.cm(6.0V) Motion speed:0.08sec/60°(4.8V) 0.06sec/60°(6.0V) Rating voltage:DC 4.8-6V Temperature range:-20°C~+60°C Dimension:22.8 x 12 x 25.4mm Weight:12.7g find out more

GP750 Head Lock Gyro Combo \n (GP750+DS620) $GP750 Head Lock Gyro Combo \n (GP750+DS620)$ £139.99 GP750 Ratings: Operating Voltage:DC 4.5~7V Current Consumption:<80mA @ 4.8V Angular Detection Speed:500 degrees/sec Operating Humidity:0?~65? RoHS certification. Operating Humidity:0%~95% Size:26x25x11mm Weight:14g DS620 Ratings: Stall torque:8.0kg.cm(4.8V) 10.0kg.cm(6.0V) Motion speed:0.09sec/60°(4.8V) 0.07sec/60°(6.0V) Rating voltage:DC 4.8-6V Temperature range:-20°C~+60°C Dimension:40.3x20.1x36mm Weight:52.2g find out more	GP750 Head Lock Gyro Combo \n(GP750+DS520) $GP750 Head Lock Gyro Combo \n(GP750+DS520)$ £128.00 GP750 Ratings: Operating Voltage:DC 4.5~7V Current Consumption:<80mA @ 4.8V Angular Detection Speed:500 degrees/sec Operating Humidity:0?~65? RoHS certification. Operating Humidity:0%~95% Size:26x25x11mm Weight:14g DS520 Ratings: Stall torque:1.9kg.cm(4.8V) 2.5kg.cm(6.0V) Motion speed:0.09sec/60°(4.8V) 0.07sec/60°(6.0V) Rating voltage:DC 4.8-6V Temperature range:-20°C~+60°C Dimension:35 x 15 x 29.2mm Weight:25.9g find out more	JP L-39 DUCTED FAN ARTF (INC B/LESS MOTOR) £105.74 Motor - 3600rpm/V (installed) Wingspan - 900mm (35.4ins) Weight - approx. 1100-1200g Suits - 3 channel Battery - Suits 11.1V - 14.8V 2100-3200 Li-Poly Length - 810mm (31.9ins) Recommended Servo - 3 micro servos Recommended ESC - 35 amp BEC find out more