ST Models

Online Catalogue | Aircraft | Electric Planes/Gliders |  ST Models

ST Models MX2 EP ARTF Ref: A-STM050 Like all ST models, the airframe is moulded accurately in 'ding' resistant EPO foam. The wings are removable by slackening just two screws and sliding them off the tubular carbon spar tube. Great for compact transportation. Access to the radio compartment requires pulling off the clip-on canopy moulding. The tough, aluminium undercarrige soaks up those landings on our club patches so well, but the model is hardly moving forward anyway! As a model to hone your aerobatic skills or just cruise around on a Sunday afternoon, the ST Models MX-2 is hard to beat. And it looks 'cool' too! Specification LiPo: Intellect 3S 2100mAh 20C Recommended Wing Loading: 35.16 g/dm2 (11.5 oz.sq.in) Wing Area: 27.3dm2 (423.2 sq.in) Length: 1106mm (43.5in) Weight: 960g (33.8oz) Typical Wingspan: 1210mm (47.6in) Price: £107.98 (Including VAT at 17.5%)	ST Models ASW28 EP ARTF Ref: A-STM010 A semi-scale model of one of the most beautiful sailplanes flying in the world today. This model is fully moulded in crash resistant EPO foam which can be repaired using normal Cyano adhesive. Even the characteristic curved wingtips are there and contribute to its amazing low speed performance. This model will stay aloft on the merest whiff of lift and will respond positively to all elevator, aileron and rudder inputs. Climb from the perfectly matched motor and folding propeller is amazing for such a small battery and power on flight times can exceed 15 minutes. Get some lift and it could be way more! Supplied with brushless motor, folding propeller, ESC and four servos ready fitted, all you have to do is fit your receiver and install a 1000mah 2 cell Li-Po and you are ready to go. Even the assembly of the main airframe parts can be done in less than 2 minutes and are as quick to disassemble for transport and storage. Specification Servos: 4 x 9g (Included) Electric Motor: Brushless Outrunner (included) S/C Rec: Brushless 12A (included) Battery: Impulse 2S 950/1330mAh required Wing Loading: 24.7g/dm2 Wing Area: 21dm2 Length: 880mm Weight: 520g Wingspan: 2000mm Price: £80.98 (Including VAT at 17.5%)	ST Models Cessna 182 EP ARTF Ref: A-STM020 An amazingly accurate scale model of one of the all-time favourite light aircraft of the 20th Century. Moulded in durable EPO foam to help re-create those compound fuselage curves as well as the characteristic ribbing on the ailerons, elevators and fowler flaps, this is a model to admire as well as fly! Just 20-30 minutes will have her assembled and ready to accept the receiver and battery of your choice. Supplied mostly pre-assembled at the factory, she comes complete with four servos (Elevator, ailerons, Rudder and Flaps), an powerful brushless motor and ESC as well as a full compliment of lights! There are two wing top lights, wing tip nav lights, a fin light and a powerful landing light, all controlled by a single electronic unit running off the flight battery. The brushless motor and ESC provide more than enough power for spritely scale flight as well as aerobatics! All this from a 3 cell 1600mAh Li-Po. When you factor in the aluminium main undercarriage and sprung, steerable nose leg (all with spats) it becomes amazing value for money. Specification Servos: 4 x 9g (Included) Electric Motor: Brushless (Included) Wing Loading: 44.4g/dm2 Recommended Propeller: 9 x 5 (Included) S/C Rec: 20A Brushless (Included) Battery: Impulse 3S 1600mah Wing Area: 21.4dm2 Length: 960mm Weight: 950g Wingspan: 1206mm Price: £107.98 (Including VAT at 17.5%)
ST Models DG1000 EP ARTF Ref: A-STM030 If you fancy something that is truely unique and stylish then the ST Models DG1000 could be the model for you. Based on the classic DG1000 glider, this gorgeous model is accurately moulded in impact resistant EPO foam, even those sexy wing tips! The wings are removable for easy transport by just releasing one screw and are re-inforced with carbon tube to ensure rigidity and strength. The aileron servos are pre-installed, as are the servo extension leads and each aileron hinge is formed by the EPO foam for best efficiency. The fuselage is also moulded in EPO foam with carbon fibre re-inforcement and the elevator and rudder pushrods pre-installed and connected to their respective servos. Just bolt on the tail and the assembly is done! Now we come to the clever bit! Not only do you get a powerful, 1500kv, outrunner brushless motor, propeller and ESC as standard, you get a unigue motor retraction system to fold it away into the fuselage. That system is servo driven and cleverly controlled by a special mixer unit (supplied). Closing the throttle stops the propeller and motor before fully retracting and closing the doors. This all operates from the throttle stick alone. Just nudge the throttle open again and the motor swings up before operating. If you use the optional switched channel, you can opt top keep the motor out and just control the throttle as normal. When the motor is away, the model becomes highly efficient and will stay aloft in minimal lift conditions. Just fit a 3S 1300mah Li-Po battery plus receiver of your choice and you're ready to go. The power is sufficient for a pretty rapid ascent and you will get many climbs from one charge. From opening the box to going flying will take less than one hour! Specification Servos: 4 x Micro, 1 x Std.Hi-Tq (all included) Radio System: 4/5 Channel required Electric Motor: Brushless Outrunner (included) 1500kv S/C Rec: Brushless 18A (included) LiPo: 3S 1330mah 13C Impulse required Wing Loading: 36.2 g/dm2 Wing Area: 27.6dm2 (427.8Sq.in) Length: 970mm (38.2mm) Wingspan: 2010mm (79.1in) Price: £130.48 (Including VAT at 17.5%)	ST Models Piper Cub EP ARTF Ref: A-STM040 Scale details include moulded surface features in the foam and a clever sprung undercarriage. The powerful, brushless outrunner motor and 10A ESC give spritely power and great endurance from the recommended low cost 950mAh Impulse Li-Po battery. Like all Cubs, this is not a model for beginners, but would make a good step up after a trainer. Specification Servos: 3 x Micro (Inc) Radio System: 4 Channel TX and RX Required Electric Motor: Brushless 1120kv Outrunner (Inc) Wing Loading: 39g/dm2 Wing Area: 21.5dm2 S/C Rec: 10A Brushless (Inc) Battery: Impulse 3S 950/1330Mah Li-Po Length: 835mm (32.9in) Weight: 840g Wingspan: 1210mm (47.6in) Price: £103.48 (Including VAT at 17.5%)

Online Catalogue | Aircraft | Electric Planes/Gliders |  ST Models