Servos

Online Catalogue | Accessories | Radio Equipment | Servos

Servo Digital BB 0.22s/5.0Kg Ref: P-S3152
With a full 5.0 Kg/cm torque and 0.16 sec/60 degrees travel the new S3152 servo is ideal for a wide range of applications, where an economic digital servo with outstanding specification is needed.
Specification
Speed: 0.16 sec/60°
Torque: 5.0 Kg/cm
Price: £26.99 (Including VAT at 15%)

Spektrum Ds821 Sport Hi-Torque Digital S Ref: SPM3702
Great value digital servo from Spektrum.
Why use analogue when digital is so cheap.
Specification:
Torque: 5.2kg.cm @ 4.8v
Speed: 0.21 sec
Weight: 42 gm
Size mm (LxWxH): 32.5 x 19 x 38.5mm
Bearing: Single Ball Bearing
Motor Type: 3-pole ferrite
Gears: Composite
Price: £20.24 (Including VAT at 15%)

DS8900G 3.5Kg/0.05S DIGITAL TAIL SERVO Ref: JRC8900G
A fantastic servo for the most demanding heli flyer.
Torque: 3.5Kg
Weight: 64g
Speed: 0.05 S/600
Size: 35 x 21 x 40.5mm
Price: £96.26 (Including VAT at 15%)

DS8915 12.0Kg/0.09S DIGI SERVO W/HSINK Ref: JRC8915DS
Extreme power and speed from JR, an ideal servo for the T-Rex 700 or similar heli.
Torque: 12.0Kg
Weight: 69g
Speed: 0.09 S/600
Size: 35 x 21 x 40.5mm
Price: £125.96 (Including VAT at 15%)

Servo Brushless - Heli 0.06s/3.8Kg Ref: P-SBL251
• Futaba brushless servos offer greatly improved response time over other servos.
• Significantly increased life span. Futaba brushless servo motors will last more than five times longer than servos that include brushed motors!
• Lower operating temperatures. As there aren’t any brushes on the motor armature, no sparks are produced when the servo motor is in operation.
• Thanks to the motor design, the outer coils act as a heatsink dissipating any heat that does occur. As an added benefit, Futaba is able to increase the torque and speed of these servos without increasing case dimensions.
• Vibration & Shock. Unlike servos that used brushed motors, the brushless servos from Futaba are less susceptible to the effects of vibration and/or shock.
• Additionally, the inertia of standard motors also facilitates the effects of vibration on the servo’s performance. By eliminating this inertia in a brushless servo, Futaba has reduced this possibility.
• Power consumption. Brushless servos consume approximately the same amount of power as their digital counterparts.
• Centering. Centering is the same as it is with the digital servos. The dead band is also equal to the digitals.
Miscellaneous
• Increased resolution for smoother operation.
• New gear treatment and materials for added endurance and longevity.
• Samarium Cobalt magnets for better performance and increased holding power.
• Dual ball bearings.
N.B. This servo must be used with a high frequency gyro.
Specification
Size: 40x20x36.8mm
Speed: 0.06s
Torque: 3.8kg
Weight: 49g
Price: £116.99 (Including VAT at 15%)

Servo Brushless - 0.13s/15.8Kg Ref: P-SBL351
• Futaba brushless servos offer greatly improved response time over other servos.
• Significantly increased life span. Futaba brushless servo motors will last more than five times longer than servos that include brushed motors!
• Lower operating temperatures. As there aren’t any brushes on the motor armature, no sparks are produced when the servo motor is in operation.
• Thanks to the motor design, the outer coils act as a heatsink dissipating any heat that does occur. As an added benefit, Futaba is able to increase the torque and speed of these servos without increasing case dimensions.
• Vibration & Shock. Unlike servos that used brushed motors, the brushless servos from Futaba are less susceptible to the effects of vibration and/or shock.
• Additionally, the inertia of standard motors also facilitates the effects of vibration on the servo’s performance. By eliminating this inertia in a brushless servo, Futaba has reduced this possibility.
• Power consumption. Brushless servos consume approximately the same amount of power as their digital counterparts.
• Centering. Centering is the same as it is with the digital servos. The dead band is also equal to the digitals.
Miscellaneous
• Increased resolution for smoother operation.
• New gear treatment and materials for added endurance and longevity.
• Samarium Cobalt magnets for better performance and increased holding power.
• Dual ball bearings.
Specification
Size: 40x20x36.8
Speed: 0.13s
Torque: 15.8kg
Weight: 63g
Price: £116.99 (Including VAT at 15%)

Servo Brushless - 0.10s/10.6Kg Ref: P-SBL451
• Futaba brushless servos offer greatly improved response time over other servos.
• Significantly increased life span. Futaba brushless servo motors will last more than five times longer than servos that include brushed motors!
• Lower operating temperatures. As there aren’t any brushes on the motor armature, no sparks are produced when the servo motor is in operation.
• Thanks to the motor design, the outer coils act as a heatsink dissipating any heat that does occur. As an added benefit, Futaba is able to increase the torque and speed of these servos without increasing case dimensions.
• Vibration & Shock. Unlike servos that used brushed motors, the brushless servos from Futaba are less susceptible to the effects of vibration and/or shock.
• Additionally, the inertia of standard motors also facilitates the effects of vibration on the servo’s performance. By eliminating this inertia in a brushless servo, Futaba has reduced this possibility.
• Power consumption. Brushless servos consume approximately the same amount of power as their digital counterparts.
• Centering. Centering is the same as it is with the digital servos. The dead band is also equal to the digitals.
Miscellaneous
• Increased resolution for smoother operation.
• New gear treatment and materials for added endurance and longevity.
• Samarium Cobalt magnets for better performance and increased holding power.
• Dual ball bearings.
Specification
Size: 40x20x36.8
Speed: 0.10s
Torque: 10.6kg
Price: £85.49 (Including VAT at 15%)

Servo Standard BB(Boxed)0.22s/3.0Kg Ref: P-S3001
One of the most economical and versatile coreless servos available.
This high specification budget servo also features a ball raced output and is ideal for use in aircraft but it is especially suited to helicopters.
Specifications
Torque 3.9 Kg/cm
Speed 0.22 sec/60°
Dimensions 40.4 x 19.8 x 36mm
Weight 48g
Price: £11.70 (Including VAT at 15%)

People who bought this item also bought:

1. Black Horse Gladiator ARTF (Ref: A-BH011)

Servo Standard (Boxed) 0.19s/4.1Kg Ref: P-S3003
Ideal for use with cars, power boats, yachts, electric and engine powered aircraft and helicopters.
Specification
Dimensions: 40.4 x 19.8 x 36mm
Speed: 0.23 sec/60°
Torque: 3.2 Kg/cm
Weight: 37.2g
Price: £8.10 (Including VAT at 15%)

Servo Retract 0.50s/5.5Kg Ref: P-S136G
High quality retract servo with a ball raced output.
High step down ratio to produce the power needed for aircraft undercarriages, but with a compact design to fit into the thinnest wings.
Specifications
Torque 1.2 Kg/cm
Speed 0.12 sec/60°
Dimensions 21.8 x 11.0 x 19.8mm
Weight 7.g
Price: £43.19 (Including VAT at 15%)

Servo Standard (Boxed) 0.22s/3.0Kg Ref: P-S148
One of the most popular general purpose servos.
Its reputation issecond to none.
Ideal for use with cars, power boats, yachts, electric and engine powered aircraft and helicopters.
Specifications
Torque 3.0 Kg/cm
Speed 0.22 sec/60°
Dimensions 40.4 x 19.8 x 36mm
Weight 44.4g
Price: £8.99 (Including VAT at 15%)

Servo Digital - Tail 0.06s/3.4Kg Ref: P-S9254
A fantastic servo suited to many applications, heli tail servo being an ideal one.
Hyper fast 0.06 sec/60 degrees digital servo, ideal for tail rotor control on helicopters as well as many other applications requiring the ultimate in speed of response, yet still having 4.8 Kg/cm torque.
Specifications
Torque 4.8 Kg/cm
Speed 0.06 sec/60°
Dimensions 40.0 x 20.0 x 36.6mm
Weight 49g
Price: £80.99 (Including VAT at 15%)

Servo Coreless-Digital 0.13s/13.8Kg Ref: P-S9351
Futaba S9351 Digital High Torque Servo, for the serious modeller among you.
Specification as follows:
Speed: .13 sec/60° @ 6.0V
Torque: 13.8 Kg-Cm @ 6V
Weight: 61g
Length: 1.57" (40mm)
Width: 0.8" (20mm)
Height: 1.44" (36.6mm)
Price: £108.00 (Including VAT at 15%)

Servo Digtl Hi Response 0.11s/4.5Kg Ref: P-S9650
Futaba S9351 Digital High Torque Servo, for the serious modeller among you.
Specification as follows:
Speed: .13 sec/60° @ 6.0V
Torque: 13.8 Kg-Cm @ 6V
Weight: 61g
Length: 1.57" (40mm)
Width: 0.8" (20mm)
Height: 1.44" (36.6mm)
Price: £65.69 (Including VAT at 15%)

Hi-Tec HS5245MG Mini Digital Servo Ref: HS5245MG
The HS-5245MG is latest addition to Hitec’s ever evolving digital servo line. With a custom designed programmable digital circuit and the unique Alumite gear train technology, the HS-5245MG is ideal for applications that call for a small lightweight, high speed, high torque servo. Motor Type : 3 Pole Ferrite
Bearing Type : Dual Ball Bearing
Torque 4.8/6.0v : 4.4 / 5.5 kg.
Speed 4.8/6.0v : 0.15 / 0.12 second
Size : 32 x 17 x 31mm
Weight : 32 g.
Price: £26.42 (Including VAT at 15%)

Hi-Tec HS645 Metal Gear Servo Ref: HS645MG
Hi-Tec HS645 Metal Gear Servo
Specification:
Speed 0.24sec/60 degrees at 4.8v
Torque 7.7Kg at 4.8v
Weight 55.2g
Sizes 41 x 20 x 38mm
Price: £32.29 (Including VAT at 15%)

Hi-Tec HS65MG Servo Ref: HS65MG
A great little servo from Hi-Tec, this one being great for smaller applications such as electric flight.
Specification as follows:
Motor Type : 3 Pole Neodynium magnet
Bearing Type : Top Ball Bearing
Torque 4.8/6.0v 1.6 / 1.9 kg.
Speed 4.8/6.0v : 0.16 / 0.13 second
Size : 24 x 12 x 24mm
Weight : 11.2 g.
Price: £21.52 (Including VAT at 15%)

Hi-Tec HS65HB Mighty Feather Servo Ref: HS65HB
Hi-Tec HS65HB, this one being great for smaller applications such as electric flight.
Specification as follows:
Gears: Karbonite
Motor Type : 3 Pole Neodynium magnet
Bearing Type : Top Ball Bearing
Torque 4.8/6.0v 1.8 / 2.2 kg.
Speed 4.8/6.0v : 0.11 / 0.14 second
Size : 23.6 x 11.6 x 24mm
Weight : 11.2 g.
Price: £16.63 (Including VAT at 15%)

Hi-Tec HS77BB Low Profile Servo Ref: HS77BB
This low profile servo from Hi-Tec is another very popular one due to its ability to fit into wing profiles easier than standard servos due to the depth.
Specification:
Motor Type : 3 pole ferrite
Gear : Plastic/Metal
Size : 44 x 23 x 25 mm
Weight : 35 g
Torque (6.0v) 5.5 kg/cm
Speed (6.0v) 0.14sec / 60o
Price: £19.56 (Including VAT at 15%)

Hi-Tec HS82MG Metal Geared Servo Ref: HS82MG
This servo is the replacement of the popular HS81 servo beign slightly higher in specification.
An ideal servo for all sorts of application including 450 size heli's, park flyers gliders and 1/18th cars/trucks and buggies.
Specifation as follows:
Speed 0.12 sec/60 degrees @ 4.8v
0.10 sec/60 degrees @ 6.0v
Torque 2.8Kg-Cm/38.88oz-In @ 4.8v
3.4Kg-Cm/47.22oz-in @ 6.0v
Weight 19.0g
Size 29.8mm x 12.0mm x 29.6mm
Price: £16.63 (Including VAT at 15%)

Hi-Tec HS55 Feather Servo Ref: HS55
Hi-Tec are a great servo for electric flight and are a popular choice by many a modeller.
Specification as follows:
Speed 0.17 sec/60 deg at 4.8 volt
Torque 1.1Kg at 4.8 volt
Weight 8.0g
Size 23 x 12 x 24mm
Price: £10.75 (Including VAT at 15%)

Servo Std BB 0.16s/6.5Kg Ref: P-S3010
Medium duty, standard sized servo with that bit of extra power and speed.
Ideal for sport applications.
Single ball bearing.
Specifications
Torque 6.5 Kg/cm
Speed 0.16 sec/60°
Dimensions 40.0 x 20.0 x 38.1mm
Weight 41g
Price: £21.59 (Including VAT at 15%)

Servo Digital Mtl/Gear 0.16s/6.5Kg Ref: P-S3050
This digital servo gives the same high torque and speed as the very popular S3010 servo and then adds digital holding power and accuracy.
With two ball bearings and metal gears, this versatile servo is ideal for a wide variety of applications.
Specifications
Torque 6.5 Kg/cm
Speed 0.16 sec/60°
Dimensions 40.0 x 20.0 x 38.1mm
Weight 48.8g
Price: £36.00 (Including VAT at 15%)

Ripmax SD200 Servo Ref: P-SD200
Ripmax SD200 mini servo, great torque from a mini servo.
Specificstion as follows:
Speed 0.14 sec/60 deg'
Torque 2.5 Kg
Size 29.5 x 25 x 13.9mm
Weight 16g
Price: £15.84 (Including VAT at 15%)

Servo Hi-Torque M/Gear 0.16s/24.0Kg Ref: P-S3306MG
The S3306 servo has carved out a niche for large aircraft and car use, and this new metal geared version adds even greater strength and shock resistance to the gear train.
Specification
Dimensions: 66.0 x 30.0 x 57.0mm
Speed: 0.16s/60deg (at 6V)
Torque: 24kg/cm (at 6V)
Weight: 158.8g
Price: £40.49 (Including VAT at 15%)

Super Tec S03 Servo Ref: 7720200
The SuperTec range of servos are outstanding value for money, this one is a standard servo with the following specification:
Type - S03
Voltage - 4.8 - 6.0v
Size - 39.5 x 20 x 35.6mm
Weight - 42g
Speed (Sec/60`) - 0.23
Torque - 3.4kg-cm
Ball Bearings - None
Price: £8.80 (Including VAT at 15%)

SUPER MICRO 7.5g SERVO (S7.5 EnErG) Ref: 7712110
Fantastic value micro servo
Type - micro high performance
Voltage - 4.8 - 5.3V
Size - 24x11.5x23mm
Weight - 7.5g
Speed (Sec/60`) - 0.12
Torque - 1.1kg-cm
Price: £7.59 (Including VAT at 15%)

SUPER MICRO DIGITAL 7.5g SERVO (S7.5D EnErG) Ref: 7712115
Another super value 7.5g servo, this one being digital.
Type - Digital micro high performance
Voltage - 4.8 - 5.3V
Size - 24x11.5x23mm
Weight - 7.5g
Speed (Sec/60`) - 0.12
Torque - 1.1kg-cm
Price: £7.59 (Including VAT at 15%)

Hi-Tec HS7965MG Digital Servo Ref: HS7965MG
Replacing the HS-5965MG, our new premium high speed HS-7965MG Digital Servo has the added benefit of our new G2 second generation programmable digital circuit. This circuit has twice the resolution of our original circuit while adding programmable overload protection. The technology doesn’t stop at the circuit board, with high performance coreless motors, dual ball bearings, bushing supported gear shafts and our Heavy Duty Metal gear train the HS-7965MG will give you everything you need no matter what the demand. Motor Type: Coreless
Bearing Type: Dual Ball Bearing
Speed: 0.13 / 0.10 sec @ 60 deg.
Torque :( 4.8v/6v) 8.6 / 10.4 kg.cm
Size:40.00 x 20.00 x 37.00mm
Weight: 62.00g
Price: £52.84 (Including VAT at 15%)

Hi-Tec HS7985MG Digital Servo Ref: HS7985MG
The new HS-7985MG High Torque Digital Servo has the added benefit of Hitecs new G2 second generation programmable digital circuit. This circuit has twice the resolution of our original circuit while adding programmable overload protection. The technology doesn’t stop at the circuit board, with a high performance coreless motor, dual ball bearing suported output shaft, bushing supported gear shafts and ourHeavy Duty Metal gear train the HS-7985MG was designed to withstand the stress of larger high performance aircraft and on/off road vehicles. Motor Type: Coreless
Bearing Type: Dual Ball Bearing
Speed: 0.16 / 0.13 sec @ 60 deg.
Torque: (4.8v/6v) 10.4 / 12.4 kg.cm
Size: " 40.00 x 20.00 x 37.00mm
Weight: 62.00g

Price: £52.84 (Including VAT at 15%)

Hi-Tec HS7975HB Digital Servo Ref: HS7975HB
Providing the ultimate combination of torque and speed, the HS-7975HB servo features the Karbonite gear technology that offers four times the strength of nylon with no flex or wear resulting in incredible precision and that “locked in feel”. Featuring our our G2 second generation programmable digital circuit with twice the resolution of our original circuit and added programmable overload protection. The HS-7975HB is an excellent choice for pattern planes and high performance helicopters up to .90 size. Motor Type: Coreless
Bearing Type: Karbonite Gear with Ball Bearing
Speed: 0.14 / 0.11 sec @ 60 deg.
Torque: (4.8v/6v) 6.6 / 8.2 kg.cm
Size: 40.00 x 20.00 x 37.00mm
Weight: 53.00g
Price: £48.44 (Including VAT at 15%)

Hi-Tec HS7975HB Digital Servo Ref: HS7966HB
HS-7966HB is Hitec’s fastest standard size servo. Providing a blinding fast .08 transit speed, instant torque and fantastic holding power, the HS-7966HB has our new G2 second generation programmable digital circuit. This circuit has twice the resolution of our original circuit while adding programmable overload protection. Motor Type: Coreless
Bearing Type: Karbonite Gear with Ball Bearing
Speed: 0.10 / 0.08 sec @ 60 deg.
Torque: (4.8v/6v) 6.6 / 8 kg.cm
Size: 40.00 x 20.00 x 37.00mm
Weight: 53.00g
Price: £48.44 (Including VAT at 15%)

Hi-Tec HS6635MG Digital Servo Ref: HS6635HB
The HS-6635HB represents the ultimate compromise between performance and price. If you are looking to get the most out of your next project but don’t want to spend a fortune on "High end" servos then the 6635HB is the way to go. These are one of the smoothest servos ever, offering excellent resolution, centering, and holding power that is unsurpassed by any servo in their price range. Motor Type : 3 Pole
Bearing Type : Dual Ball Bearing
Torque 4.8/6.0v: 15/6 kg
Speed 4.8/6.0v: 0.18/0.15 SEC
Size : 40x20x37mm
Weight : 52 g.
Price: £28.18 (Including VAT at 15%)

Hi-Tec HS5645MG Digital Servo Ref: HS5645MG
The HS-5645MG represents the latest generation of Hitec servos. With a custom designed programmabledigital circuit and our unique Alumite/ MP gear train technology the HS-5645MG has the infamous ultra tough gear train. The powerful HS-5645MG is perfect for those applications that demand a high torque servo. Motor Type : 3 Pole Ferrite
Bearing Type : Dual Ball Bearing
Torque 4.8/6.0v : 10.3 / 12.1 kg.
Speed 4.8/6.0v : 0.23 / 0.18 second
Size : 41 x 20 x 38mm
Weight : 60 g.
Price: £35.22 (Including VAT at 15%)

People who bought this item also bought:

1. Menz 20" x 10" 2 Bladed Wooden (Ref: MENZ20/10)

2. Menz 19" x 8" 2 Bladed Wooden (Ref: MENZ19/8)

3. 4405505 J P Energy 4.8v 1300Mah Square Receiver Pack NiMH (Ref: 4405505)

Hi-Tec HS5475HB Digital Servo Ref: HS5475HB
HS-5475BB kicks off a whole new line of Hitec Programmable Digital servos. Featuring our exclusive heavy duty,Karbonite gear train technology and a programmable digital circuit, the HS-5475 offers high performance programmable performance at a fraction of our competitor’s price. Motor Type : 3 Pole Ferrite
Bearing Type : Dual Ball Bearing
Torque 4.8/6.0v -4.3 / 5.5 kg.
Speed 4.8/6.0v : 0.23 / 0.18 second
Size : 39 x 20 x 36mm
Weight : 409 g
Price: £17.61 (Including VAT at 15%)

Hi-Tec HS5625MG Digital Servo Ref: HS5625MG
The powerful HS-5625MG is perfect for those high demand applications requiring a standard sized servo. With a custom designed programmable digital circuit and our unique Alumite/ MP gear train technology. Motor Type : 3 Pole Ferrite
Bearing Type : Dual Ball Bearing
Torque 4.8/6.0v : 7.9 / 9.4 kg.
Speed 4.8/6.0v : 0.17 / 0.14 oz.
Size : 41 x 20 x 38mm
Weight : 60 g.
Price: £35.22 (Including VAT at 15%)

Hi-Tec HS5745MG Digital Servo Ref: HS5745MG
The HS-5745MG giant scale servo uses Hitec’s digital, programmable servo technology to provide tons of torque and holding power for the most demanding applications. Featuring two ball bearings, a custom external motor heat sink, and thee MP gear train, the HS-5745MG is the servo of choice for your next large scale R/C project. Motor Type : High Performance 3 Pole Ferrite
Bearing Type : Triple Ball Bearing
Torque 4.8/6.0v : 15 / 18 kg.
Speed 4.8/6.0v : 0.18 / 0.15 second
Size : 59 x 29 x 52mm
Weight : 161 g.

Price: £44.03 (Including VAT at 15%)

Servo Mini Heli 0.08s/2.0Kg Ref: P-S9257
A great tail servo for the 500 size heli's.
Specification
Speed: 0.08s
Torque: 2.0kg
Price: £65.69 (Including VAT at 15%)

DS 510 Digital Servo Ref: K10419A
Stall torque:3.7kg.cm(4.8V) 4.6kg.cm(6.0V)
Motion speed:0.13sec/60°(4.8V) 0.11sec/60°(6.0V)
Rating voltage:DC 4.8-6V
Temperature range:-20°C~+60°C
Dimension:35 x 15 x 29.2mm
Weight:25.9g
Price: £30.15 (Including VAT at 15%)

DS 520 Digital Servo Ref: K10420A
Stall torque:1.9kg.cm(4.8V) 2.5kg.cm(6.0V)
Motion speed:0.09sec/60°(4.8V) 0.07sec/60°(6.0V)
Rating voltage:DC 4.8-6V
Temperature range:-20°C~+60°C
Dimension:35 x 15 x 29.2mm
Weight:25.9g
Price: £30.15 (Including VAT at 15%)

People who bought this item also bought:

1. O.S. MAX 120AX Ring w/E-5020 Sil. (Ref: L-OS19210)

2. DS 610 Digital Servo (Ref: K10425A)

3. Black Horse Yak-54 - 120 ARTF (Ref: A-BH048)

DS 620 Digital Servo Ref: K10421A
Stall torque:8.0kg.cm(4.8V) 10.0kg.cm(6.0V)
Motion speed:0.09sec/60°(4.8V) 0.07sec/60°(6.0V)
Rating voltage:DC 4.8-6V
Temperature range:-20°C~+60°C
Dimension:40.3 x 20.1 x 36mm
Weight:52.2g
Price: £40.49 (Including VAT at 15%)

DS 610 Digital Servo Ref: K10425A
Stall torque:9.6kg.cm(4.8V) 12.0kg.cm(6.0V)
Motion speed:0.10sec/60°(4.8V) 0.08sec/60°(6.0V)
Rating voltage:DC 4.8-6V
Temperature range:-20°C~+60°C
Dimension:40.3 x 20.1 x 36mm
Weight:52.2g
Price: £40.49 (Including VAT at 15%)

People who bought this item also bought:

1. O.S. MAX 120AX Ring w/E-5020 Sil. (Ref: L-OS19210)

2. DS 520 Digital Servo (Ref: K10420A)

3. Black Horse Yak-54 - 120 ARTF (Ref: A-BH048)

DS410 Digital Servo Ref: K10443A
Stall torque:1.8kg.cm(4.8V)
2.2kg.cm(6.0V)
Motion speed:0.13sec/60°(4.8V)
0.09sec/60°(6.0V)
Rating voltage:DC 4.8-6V
Temperature range:-20°C~+60°C
Dimension:22.8 x 12 x 25.4mm
Weight:12.7g
Price: £17.09 (Including VAT at 15%)

DS420 Digital Servo Ref: K10444A
Stall torque:0.75kg.cm(4.8V)
1.0kg.cm(6.0V)
Motion speed:0.08sec/60°(4.8V)
0.06sec/60°(6.0V)
Rating voltage:DC 4.8-6V
Temperature range:-20°C~+60°C
Dimension:22.8 x 12 x 25.4mm
Weight:12.7g
Price: £17.09 (Including VAT at 15%)

Industrial Servo 0.7S/120Kg Ref: P-PS-105
The output from a servo is a combination of speed and power. There's no point in choosing a fast servo that slows down in use. These two power servos are designed for those ultra tough industrial situations. Start Torque (Kg/cm): 100Kg/cm Speed (sec/60°): 0.90 Dimensions (mm): 118.4 x 132 x 5 Weight (g): 780
Price: £512.99 (Including VAT at 15%)

Servo Mini 0.15s/1.9Kg Ref: P-S135
A small, economical, high speed mini servo with excellent torque.
The S135 is suitable for use in 1:10 and 1:12 EP on road cars and bikes.
It could also be used for electric flight, gliders etc.
Specification
Torque 1.9 Kg/cm
Speed 0.15 sec/60°
Dimensions 31 x 16 x 30.2mm
Weight 29.5g
Price: £26.99 (Including VAT at 15%)

Servo Mini Metal/Gear 0.20s/3.3Kg Ref: P-S3002
High torque metal geared miniature servo with a ballraced output.
The S3002 is ideal for use with on road cars, gliders, aircraft and special high stress applications.
Specifications
Torque 3.3 Kg/cm
Speed 0.22 sec/60°
Dimensions 31 x 16 x 30.2mm
Weight 29g
Price: £53.99 (Including VAT at 15%)

Servo Standard BB 0.19s/4.1Kg Ref: P-S3004
The ball raced version of the economy S3003 is ideal for all standard applications.
Specification
Dimensions: 40.4 x 19.8 x 36mm
Speed: 0.23 sec/60°
Torque: 3.2 Kg/cm
Weight: 39g
Price: £10.79 (Including VAT at 15%)

Servo Std BB Water/Res 0.16s/6.5Kg Ref: P-S3014
With its 6.5Kg/cm torque, high speed and ball bearing supported output, this standard size, water-resistant servo is ideal for general car and buggy use as well as a variety of boat and yacht applications.
Specification
Speed: 0.16sec/60deg
Dimensions: 40.0 x20.0 x 38.1mm
Torque: 6.5kg/cm
Weight: 41g
Price: £22.49 (Including VAT at 15%)

Servo Micro 0.18s/2.5Kg Ref: P-S3101
Superb quality micro servo for use with small scale models.
Featuring the latest in SMT circuit boards and integrally mounted motor for protection against vibration and shock, the S3101 is ideal for all micro servo applications.
Torque: 2.5 Kg/cm
Speed: 0.18 sec/60°
Dimensions: 28 x 13 x 29.7mm
Weight: 17g
Specification
Torque 2.5 Kg/cm
Speed 0.18 sec/60°
Dimensions 28 x 13 x 29.7mm
Weight 17g
Price: £26.99 (Including VAT at 15%)

Servo Micro Mtl/Gear 0.25s/3.7Kg Ref: P-S3102
When micro servo durability is required the S3102 is suitable for a variety of applications.
The same dimensions as the S3101, the S3102 has metal gears, ideal for direct surface control.
Specifications
Torque 3.7 Kg/cm
Speed 0.25 sec/60°
Dimensions 28 x 13 x 29.7mm
Weight 22g
Price: £53.99 (Including VAT at 15%)

Servo Sub-Micro 0.10s/1.6Kg Ref: P-S3110
The S3110 takes on the mantle of being the lightest standard plug servo Futaba have ever produced at just 7.7g, yet it still offers a full 1.6 Kg/cm torque at 0.10 sec/60 degrees travel. Perfect for most indoor or slow fly models as well as for light duty use in many larger models.
Specification
Dimensions: 21.8 x 11.0 x 19.8mm
Speed (4.8v): 0.10 sec/60deg
Torque (4.8v): 1.6kg/cm
Weight: 7.7g
Price: £16.19 (Including VAT at 15%)

Servo Micro 0.10s/1.5Kg Ref: P-S3113
Sub micro in size and weight, but packing a simply amazing 1.7Kg torque, the versatile new S3113 servo is ideal for any of the high performance small electric models now available.
Specification
Dimensions: 21.8 x 11.0 x 20.3mm
Speed: 0.10s/60deg (at6V)
Torque: 1.7kg/cm (at 6V)
Weight: 9.3g
Price: £21.59 (Including VAT at 15%)

Servo Mini 0.15s/2.8Kg Ref: P-S3115
This new mini servo is ideal for many applications, particularly small and mid sized aircraft together with electric helicopters, and for use with auxiliary functions.
Specification
Dimensions: 28.0 x 13.0 x 29.7mm
Speed: 0.15s/60 deg
Torque: 2.8kg/cm
Weight: 17g
Price: £17.99 (Including VAT at 15%)

Servo Digital 11mmMtl/Gr0.24s/3.7Kg Ref: P-S3150
Ideal for high performance gliders or electric gliders, this thin (10.8mm) and small digital servo has metal gears, features two ball bearings for precise control and gives a full 3.7 Kg/cm of torque.
It is also perfect for larger models where servos need to be 'buried' in thin fins or tailplane halves.
Specifications
Torque 3.7 Kg/cm
Speed 0.24 sec/60°
Dimensions 30 x 10.8 x 29.0mm
Weight 23g
Price: £36.00 (Including VAT at 15%)

Servo Micro Digital 0.10s/1.7Kg Ref: P-S3153
A digital version of the new S3113 servo, the S3153 takes the already impressive performance still further, with the addition of digital holding power and precision
Specification
Speed: 0.10s/60 deg (at 6V)
Dimensions: 21.8 x 11.0 x 20.3mm
Torque: 1.7kg/cm (at 6V)
Weight: 9.6g
Price: £31.49 (Including VAT at 15%)

Servo Micro Digital 0.09s/1.7Kg Ref: P-S3154
Super light at only 7.9 grams, this sub micro digital servo is also incredibly fast, yet packs a full 1.7Kg torque, making it perfect for small high performance electric helicopters or similar small aircraft.
Specification
Dimensions: 21.8 x 11.7 x 19.8mm
Speed: 0.09s/60 deg (at 6V)
Torque: 1.7kg/cm (at 6V)
Weight: 7.9g
Price: £26.99 (Including VAT at 15%)

Servo Mini Digital 11mm 0.16s/2.0Kg Ref: P-S3155
With the same case size as the popular S3150, the new S3155 metal geared and twin ballraced digital servo offers increased speed but lower torque, for those applications where speed is all important.
Specification
Dimensions: 30.0 x 10.8 x 29.0mm
Speed: 0.16/60deg
Torque: 2.0kg/cm
Weight: 20.4g
Price: £36.00 (Including VAT at 15%)

Servo Hi-Torque 0.19s/8.0Kg Ref: P-S3302
Large size ballraced servo with metal gears.
Its high torque makes it ideal for use with large engine powered boats, buggies and large aircraft.
Features water and dust tight seals for added security.
Specifications
Torque 8.0 Kg/cm
Speed 0.19 sec/60°
Dimensions 59.2 x 28.8 x 49.8mm
Weight 103g
Price: £53.99 (Including VAT at 15%)

Servo Hvy Duty BBMG 0.20s/8.9Kg Ref: P-S3305
A heavy duty standard servo with metal gears, dual ball bearings and 9.0Kg.cm of torque.
Ideal for normal applications that require extra power and strength.
Specifications
Torque 9.0 Kg/cm
Speed 0.20 sec/60°
Dimensions 40.0 x 20 x 38.1mm
Weight 45.6
Price: £36.00 (Including VAT at 15%)

Servo Hi-Torque 0.16s/24.0Kg Ref: P-S3306
The largest servo in the Futaba range, the S3306 offers a full 24.0Kg/cm torque together with excellent speed. Perfectly suited to use in the large scale petrol cars now so popular, or for very large model aircraft. Dual ballraced.
Specification
Dimensions: 66.0 x 30.0 x 57.0 mm
Speed: 0.16s/60deg (at 6V)
Torque: 24kg/cm (at 6V)
Weight: 128g
Price: £36.00 (Including VAT at 15%)

Servo Ultra Torque 0.26s/14 Kg Ref: P-S3801
A large, heavy duty servo with metal gears, ballraced output and massive torque.
Wide rotation angle also makes it ideal for large yachts but it is equally suitable for aircraft and other special applications.
Includes servo horn and sail arm.
Specifications
Torque 14 Kg/cm
Speed 0.26 sec/60°
Dimensions 59.2 x 28.8 x 49.8mm
Weight 107g
Price: £53.99 (Including VAT at 15%)

Mini Sail Servo 0.56s/11 Kg Ref: P-S3802
Futaba's new low cost sail servo has had its speed and output torque improved by 20%.
Supplied with a 12cm output arm designed to fit most small to mid class yachts and a heavy duty output disc, the S3802 also has water/dust tight seals and a ballraced output.
Specifications
Torque 11.0 Kg/cm
Speed 0.56 sec/60°
Dimensions 44 x 23 x 43mm
Weight 72g
Price: £49.50 (Including VAT at 15%)

Servo Digital - Car 0.20s/19 Kg Ref: P-S5050
Power and high holding torque are combined in Futaba's latest digital servo.
Although delivering a huge 19Kg.cm of torque it is the S5050's ability to hold position which sets it apart from the standard servo competition.
Specifications
Torque 19.0 Kg/cm
Speed 0.20 sec/60°
Dimensions 59.2 x 28.8 x 49.8mm
Weight 130g
Price: £108.00 (Including VAT at 15%)

Sailwinch Vari-Rotation 9.8Kg Ref: P-S5801
A true sail winch, the S5801 has the massive torque and wide rotation angle needed for model yachts.
The number of rotations of the drum output can be adjusted (2-6 turns) via an integral V/R pot.
Specifications
Torque 9.8 Kg/cm (7.2v)
Speed 0.5 sec/60°
Dimensions 46 x 25 x 44mm
Weight 83g
Price: £125.99 (Including VAT at 15%)

Servo Std - Coreless 0.18s/5.2Kg Ref: P-S9001
One of the most economical and versatile coreless servos available. This high specification budget servo also features a ball raced output and is ideal for use in aircraft but it is especially suited to helicopters. Torque: 3.9 Kg/cm Speed: 0.22 sec/60° Dimensions: 40.4 x 19.8 x 36mm Weight: 48g
Price: £31.49 (Including VAT at 15%)

Servo Coreless - Flat 0.13s/3.6Kg Ref: P-S9102
Very fast servo with coreless motor and ball bearings.
The slimline design makes it ideal for cars, wing mounting in aircraft for individual aileron control and many other applications where height is at a premium.
Specifications
Torque 1 3.6 Kg/cm
Speed 0.13 sec/60°
Dimensions 44.7 x 22.6 x 26mm
Weight 46g
Price: £76.49 (Including VAT at 15%)

Servo Digital - Aileron 0.18s/5.8Kg Ref: P-S9150
Features a unique angled case and wing mounting flange, eliminating the need for a special wing mount.
Fitting flush in the wing, the output linkage can be positioned for direct line connection.
Specifications
Torque 5.8 Kg/cm
Speed 0.18 sec/60°
Dimensions 47 x 27 x 25.3mm
Weight 53g
Price: £58.49 (Including VAT at 15%)

Servo Digital - F3C 0.19s/9.5Kg Ref: P-S9151
The rudder, with its huge mass, has an ever increasing role in today's aerobatics/3D flying.
Purpose designed for rudder use, the S9151 has a huge 9.5kg torque with fast response and high power holding characteristics.
Specifications
Torque 9.5 Kg/cm
Speed 0.19 sec/60°
Dimensions 40 x 20 x 36.8mm
Weight 50g
Price: £85.49 (Including VAT at 15%)

Servo Digital - Power 0.19s/20Kg Ref: P-S9152
Possibly the perfect servo for many larger models, where high torque is essential but minimising the weight and size of the servo is equally important.
With a full 20 Kg/cm torque, yet being less than 60% the size of the popular 'Brick' servos, the digital S9152 fits the bill.
Specifications
Torque 20.0 Kg/cm
Speed 0.19 sec/60°
Dimensions 48.6 x 25.2 x 39.7mm
Weight 85g
Price: £98.99 (Including VAT at 15%)

Servo Digital - Speed 0.15s/15Kg Ref: P-S9153
Stablemate of the S9152 servo, the S9153 is the same size and weight, but is even faster at 0.15 sec/60 degrees travel, whilst still giving a full 15 Kg/cm torque.
Being digital it also has greater holding power and increased accuracy.
Specifications
Torque 5.0 Kg/cm
Speed 0.15 sec/60°
Dimensions 48.6 x 25.2 x 39.7mm
Weight 85g
Price: £98.99 (Including VAT at 15%)

Servo Digital - Wing 0.14s/4.6Kg Ref: P-S9154
Possibly the perfect servo for many larger models, where high torque is essential but minimising the weight and size of the servo is equally important.
With a full 20 Kg/cm torque, yet being less than 60% the size of the popular 'Brick' servos, the digital S9152 fits the bill.
Specifications
Torque 4.6 Kg/cm
Speed 0.14 sec/60°
Dimensions 47.5 x 27.0 x 25.3mm
Weight 53g
Price: £76.49 (Including VAT at 15%)

Servo Coreless-Digital 0.13s/13.8Kg Ref: P-S9155
This high power and speed standard size digital servo has been optimised for use with the large petrol powered models now so popular, where large control surfaces and high vibration levels are common.
Specification
Dimensions: 40.0x20.0x36.6
Speed: 0.13sec/60deg (6.0v)
Torque: 13.8kg/cm (6.0v)
Weight: 61g
Price: £108.00 (Including VAT at 15%)

Servo Sub-Micro (Molex) 0.09s/1.7Kg Ref: P-S3114M
Specification:
Torque: 20.8 oz-in (1.5 kg-cm) / 23.5 oz-in (1.7 kg-cm)
Speed: .10 sec/60° / .09 sec/60°
Dimensions: .86 x .43 x .78in (21.8 x 11 x 19.8mm)
Weight: .27oz (7.8g)
Price: £16.19 (Including VAT at 15%)

DS3500G 2.0Kg/0.07S MINI DIGI TAIL SERV0 Ref: JRC3500G
Torque: 2.0Kg
Speed: 0.07 S/600
Weight: 26g
Size: 26.5 x 15 x 33mm
Price: £66.55 (Including VAT at 15%)

DS318 0.7Kg/0.08S MICRO DIGITAL SERVO Ref: JRC318DS
Torque: 0.7Kg
Speed: 0.08 S/600
Weight: 6g
Size: 19.8 x 11.2 x 20.9mm
Price: £17.57 (Including VAT at 15%)

New Products

Futaba 12ch Combo 2.4GHz M1 R6014FS £899.99 Taking 12 Channel Control to the Next Level! Brand New 2.4GHz Version Now Available When you improve upon all of the best that Futaba 2048 technology has to offer, you have the 12FG -one serious system for discerning R/C pilots. From the state-of-the-art receiver to the capacity to store memories for a whopping 1,882 models, the 12FG has the features and functions to position itself far above the competition. And because it's from Futaba, you can fly with confidence, knowing that the industry's finest research and development is behind you. 12FG Specification: G3 2048 resolution 30 model memory -up to 1,882 models with a 1GB SD card Combines airplane, glider, and helicopter programming Supports 13 wing types, 3 tail types, and 8 heli swash types 8 total flight conditions (7 plus the default) Variable Dual Rates (VDR) Servo grouping for servo synchronization Digital trims on all 4 main channels 7.2V 1700mAh NiMH transmitter battery Battery charging jack Ergonomic rubber grips Newly designed "joystick" button and Dial-N-Key editing for easier menu navigating find out more	Futaba 12ch Combo 2.4GHz M2 R6014FS £899.99 Taking 12 Channel Control to the Next Level! Brand New 2.4GHz Version Now Available When you improve upon all of the best that Futaba 2048 technology has to offer, you have the 12FG -one serious system for discerning R/C pilots. From the state-of-the-art receiver to the capacity to store memories for a whopping 1,882 models, the 12FG has the features and functions to position itself far above the competition. And because it's from Futaba, you can fly with confidence, knowing that the industry's finest research and development is behind you. 12FG Specification: G3 2048 resolution 30 model memory -up to 1,882 models with a 1GB SD card Combines airplane, glider, and helicopter programming Supports 13 wing types, 3 tail types, and 8 heli swash types 8 total flight conditions (7 plus the default) Variable Dual Rates (VDR) Servo grouping for servo synchronization Digital trims on all 4 main channels 7.2V 1700mAh NiMH transmitter battery Battery charging jack Ergonomic rubber grips Newly designed "joystick" button and Dial-N-Key editing for easier menu navigating find out more	Futaba 14ch Rx 2.4GHz £161.99 Compact, lightweight 14-channel receiver whose small size makes it equally suitable for both small models and large model aircraft giving it great flexibility.Compatible with TM-8 und TM-14 2.4 GHz FASST RF modules. find out more

Futaba 6ch Rx 2.4GHz Parkfly (Molex conn) £53.99 1.6 x 1.1 x .35 in (40 x 27 x 9 mm) 0.33 oz (9.32 g) 0.22 oz (6.37 g) find out more	DS318 0.7Kg/0.08S MICRO DIGITAL SERVO £17.57 Torque: 0.7Kg Speed: 0.08 S/600 Weight: 6g Size: 19.8 x 11.2 x 20.9mm find out more	DS3500G 2.0Kg/0.07S MINI DIGI TAIL SERV0 £66.55 Torque: 2.0Kg Speed: 0.07 S/600 Weight: 26g Size: 26.5 x 15 x 33mm find out more

Servo Sub-Micro (Molex) 0.09s/1.7Kg £16.19 Specification: Torque: 20.8 oz-in (1.5 kg-cm) / 23.5 oz-in (1.7 kg-cm) Speed: .10 sec/60° / .09 sec/60° Dimensions: .86 x .43 x .78in (21.8 x 11 x 19.8mm) Weight: .27oz (7.8g) find out more	GP750 Head Lock Gyro £105.00 Operating Voltage:DC 4.5~7V Current Consumption:<80mA @ 4.8V Angular Detection Speed:500 degrees/sec Operating Humidity:0?~65? RoHS certification. Operating Humidity:0%~95% Size:26x25x11mm Weight:14g find out more	GP750 Head Lock Gyro Combo (GP750+DS420) £114.99 GP750 Ratings: Operating Voltage:DC 4.5~7V Current Consumption:<80mA @ 4.8V Angular Detection Speed:500 degrees/sec Operating Humidity:0?~65? RoHS certification. Operating Humidity:0%~95% Size:26x25x11mm Weight:14g DS420 Ratings: Stall torque:0.75kg.cm(4.8V) 1.0kg.cm(6.0V) Motion speed:0.08sec/60°(4.8V) 0.06sec/60°(6.0V) Rating voltage:DC 4.8-6V Temperature range:-20°C~+60°C Dimension:22.8 x 12 x 25.4mm Weight:12.7g find out more

GP750 Head Lock Gyro Combo \n (GP750+DS620) $GP750 Head Lock Gyro Combo \n (GP750+DS620)$ £139.99 GP750 Ratings: Operating Voltage:DC 4.5~7V Current Consumption:<80mA @ 4.8V Angular Detection Speed:500 degrees/sec Operating Humidity:0?~65? RoHS certification. Operating Humidity:0%~95% Size:26x25x11mm Weight:14g DS620 Ratings: Stall torque:8.0kg.cm(4.8V) 10.0kg.cm(6.0V) Motion speed:0.09sec/60°(4.8V) 0.07sec/60°(6.0V) Rating voltage:DC 4.8-6V Temperature range:-20°C~+60°C Dimension:40.3x20.1x36mm Weight:52.2g find out more	GP750 Head Lock Gyro Combo \n(GP750+DS520) $GP750 Head Lock Gyro Combo \n(GP750+DS520)$ £128.00 GP750 Ratings: Operating Voltage:DC 4.5~7V Current Consumption:<80mA @ 4.8V Angular Detection Speed:500 degrees/sec Operating Humidity:0?~65? RoHS certification. Operating Humidity:0%~95% Size:26x25x11mm Weight:14g DS520 Ratings: Stall torque:1.9kg.cm(4.8V) 2.5kg.cm(6.0V) Motion speed:0.09sec/60°(4.8V) 0.07sec/60°(6.0V) Rating voltage:DC 4.8-6V Temperature range:-20°C~+60°C Dimension:35 x 15 x 29.2mm Weight:25.9g find out more	JP L-39 DUCTED FAN ARTF (INC B/LESS MOTOR) £105.74 Motor - 3600rpm/V (installed) Wingspan - 900mm (35.4ins) Weight - approx. 1100-1200g Suits - 3 channel Battery - Suits 11.1V - 14.8V 2100-3200 Li-Poly Length - 810mm (31.9ins) Recommended Servo - 3 micro servos Recommended ESC - 35 amp BEC find out more

Online Catalogue | Accessories | Radio Equipment | Servos

Sections

Best Sellers

New Products

Coupons

Servos

New Products

Coupons
If you have a coupon for our shop then enter it here: